Description

EZ Loader “G15” 80BS 14’–17′ • 2,000 lb Base Model (Galvanized)

What this trailer is built to do

The EZ Loader 80BS 14’–17′ (2,000 lb) is a galvanized, single-axle bunk trailer designed for the boats people use every week. It supports many small fishing boats and skiffs, plus a wide range of shallow-V and modified-V hulls. As a result, it’s a strong choice for creeks, rivers, backwaters, and rough public ramps where the trailer needs to load straight and tow steady.

Bottom line: this model keeps things simple. You get a galvanized frame, spring suspension, and two adjustable carpeted bunks you can align to the hull for a centered, predictable tow.

Why the 80BS works in the real world

Small boats can be harder to trailer than big boats. Hull shapes vary, and “close enough” often turns into poor loading or an off-balance tow. That’s why this platform focuses on correct bunk support and proper setup.

• First, two adjustable carpeted bunks let you tune hull support for flat, shallow-V, and modified-V bottoms.
• Next, a galvanized frame with galvanized adjustable hardware helps the trailer hold up to repeated wet-ramp use.
• Because it uses spring suspension on a single axle, it smooths out road shock and improves tow feel.
• Meanwhile, submersible LED lighting keeps visibility high at the ramp and on night tows.
• Finally, an adjustable winch post helps set bow position for cleaner, more repeatable loading.

Fitment notes (what we verify before you buy)

Many owners shop “14–17 ft” and stop there. However, correct fit also depends on how your boat sits and loads. So we confirm your measurements and your real running weight (fuel, batteries, gear, and motor).

Legacy reference: On prior 411Marine fitment notes for the 80BS platform, a common D-ring to drain-plug working range was shown around 13’2″ minimum to 16’6′ maximum. That range is a guide only, and we still confirm your specific boat before final match.

Key specs (base model)

• Boat range: 14–17 ft
• Load capacity: 2,000 lb
• GVWR: 2,500 lb
• Axle / suspension: single axle • spring suspension
• Hubs: oil bath hub (low maintenance, 5-lug)
• Brakes: N/A
• Coupler: 2″
• Lights: submersible LED (DOT compliant)
• Wheels & tires: ST-rated radial tires on galvanized steel rims (185/80/13D)
• Fenders: single step fenders — black ABS composite
• Tongue jack: included (bolt-on swivel style)
• Width between fenders: 64″
• Overall width: 80″ (outside-to-outside fenders)
• Overall length (OAL): approx. 19 ft (varies by hull and winch-post position)
• Shipping weight: approx. 500 lb (varies by configuration)

Important: The boat and trailer—fully loaded with fuel, batteries, engine, and gear—must stay within the GVWR (Gross Vehicle Weight Rating). If you’re unsure, call us. We’ll go over the numbers with you and make sure you’re matched correctly.

Options and common upgrades

• Optional wheels: shown with aluminum Lionshead rims (+$150/set). Not included in base pricing.
• Guide-ons (PVC side guides or uprights)
• Spare tire and mount options
• Winch and jack upgrades
• Boat-specific bunk adjustments for unique hulls

What we do differently (the 411Marine legacy)

Most trailer problems are setup problems. So that’s where we stay involved. If loading changes, you add gear, or you want upgrades, we’ll help you get it dialed back in.

To do that, we may ask for photos and a few extra details. That way, we can confirm what’s happening and give you the right next step. There’s almost always an answer—we just need the right questions to get there.

• For example: fitment and adjustment help (bunks, winch stand, bow stop position)
• Also: balance guidance (boat position and tongue weight feel)
• Plus: ramp tips (shallow ramps, slick ramps, broken ramps, crosswind loading)
• And: parts and upgrade support (lights, bunks, winch parts, guides, jacks, hardware)
• Next size Up: 90BS 14-18 2300

Shipping, pickup, and warranty

Pickup: Exit 5 off I-95, Hardeeville, SC.
Warranty: EZ Loader limited warranty reference: ezloader.com/owner.

Start with a quick fitment call

To match it correctly, we’ll ask for your boat make/model/year, beam, and real running weight. Also, if you have photos (side + rear view) on the current trailer, they help us verify details fast.

Call: 843-784-5797
Email: EZLoader@411marine.com

Specs and warranty references are provided by EZ Loader for owner support.